The self-cleaning principle of the full-automatic ultrasonic cleaning machine is very suitable for cleaning products with complex shapes and high cleaning accuracy requirements. Cleaning agent can only dissolve part of the dirt, and it is not enough for stubborn dirt and dirt inside parts. Ultrasonic cleaning is a kind of physical cleaning, like countless small bombs blasting to remove the internal and external surfaces of objects at the same time, combined with the chemical cleaning of cleaning agents, so that the cleaning of internal surfaces and internal holes that cannot be completed by traditional methods can be completed at one time. The cleaning methods used in industrial cleaning are generally manual cleaning, organic solvent cleaning, steam vapor cleaning, and high-pressure water jet cleaning. Compared with ultrasonic cleaning, ultrasonic cleaning is internationally recognized as the current cleaning method with high efficiency and good effect. Its cleaning efficiency has reached more than 98%, and the cleaning cleanliness is also better than traditional cleaning. The cleaning efficiency of traditional manual cleaning and organic solvent cleaning is only 60% - 70%, and even the cleaning efficiency of meteorological cleaning and high-pressure water jet cleaning is less than 90%. Therefore, in industrial cleaning, ultrasonic cleaning machine is undoubtedly a good choice for cleaning because of its high efficiency and good effect, which is suitable for heavy workload cleaning.

在所有清洗方式中，清洗成本大體可分為：設備成本和消耗成本。生產的超聲波清洗設備使用壽命約為十年，除設備購置成本高于手工清洗和有機堿性溶劑刷洗外，低于氣相清洗和高壓水射流清洗，對于消耗成本，以有效尺寸為600×400×350mm，功率為1KW，價格約為1萬元的超聲波清洗機為例，工作一小時，耗電1度，費用約為0.5元，堿性金屬清洗劑1公斤，價格約為20元，可反復使用20-50個小時（根據污染程度而定），相當于0.4-1元/小時，而一般工件清洗時間僅為2-10分鐘即可，且一次清洗可對一定數量及體積的工件同時清洗，因此對于消耗成本而言，采用超聲波清洗，不僅清洗效果好，而且清洗成本相當于不到0.04元/件，還不算節省的勞動力成本，遠遠低于其他各類清洗方法。

In all cleaning methods, the cleaning cost can be roughly divided into: equipment cost and consumption cost. The service life of the ultrasonic cleaning equipment produced is about ten years. Except that the equipment purchase cost is higher than manual cleaning and organic alkaline solvent brushing, it is lower than gas-phase cleaning and high-pressure water jet cleaning. For the consumption cost, the effective size is 600 × four hundred × Take the ultrasonic cleaning machine of 350mm, with a power of 1kW and a price of about 10000 yuan as an example. It works for one hour, consumes 1 degree of power, and costs about 0.5 yuan. The alkaline metal cleaning agent is 1kg, and the price is about 20 yuan. It can be used repeatedly for 20-50 hours (depending on the degree of pollution), which is equivalent to 0.4-1 yuan / hour. Generally, the cleaning time of workpieces is only 2-10 minutes, and a certain number and volume of workpieces can be cleaned at the same time, Therefore, for the consumption cost, using ultrasonic cleaning, not only the cleaning effect is good, but also the cleaning cost is equivalent to less than 0.04 yuan / piece, which is far lower than other kinds of cleaning methods.

在目前所有的清洗方式中，超聲波清洗是效率高，效果好的一種，之所以超聲波清洗能夠達到如此的效果，是與它獨特的工作原理和清洗方法密切相關的。常見的手工清洗方法無法達到要求，即使是蒸汽清洗和高壓水射流清洗也無法滿足對清潔度較高產品需求，因此這也是超聲波清洗被越來越多的廣泛應用于各行各業。

Among all the current cleaning methods, ultrasonic cleaning is one with high efficiency and good effect. The reason why ultrasonic cleaning can achieve such an effect is closely related to its unique working principle and cleaning method. Common manual cleaning methods can not meet the requirements, even steam cleaning and high-pressure water jet cleaning can not meet the demand for products with high cleanliness, so ultrasonic cleaning is more and more widely used in all walks of life.

以上就是為大家介紹的有關超聲波清洗設備的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://m.ysjkbx.cn

The above is a detailed introduction about ultrasonic cleaning equipment for you. I hope it can help you. If you have any questions, please contact us. We will provide services for you with a professional attitude http://m.ysjkbx.cn